###XERUN V10 Bandit 21.5T 1760kv Combo

SKU: HW38020213

$270.90
RRP $301.00
SAVE $30.10 (10%)
Out of Stock: Available to Order



Fixed Rate By Invoice Total - $25.99
Excluding Dangerous Goods, Large Aircraft Kits/Parts, Large Car Kits/Bodies, or any other oversized, or over weight items - Additional Charges May Apply (Once order is placed we will contact you if there are any additional charges)

Free pick-up from Warehouse - $0.00
Pick up from: Warehouse in Smeaton Grange NSW 2567 Confirmation from store required before picking up order. Goods CANNOT be picked up without store confirmation. Valid photo ID must be presented and verified, along with confirmation email, when picking up order. For all online order inquiries please email sales@rchobbies.comau. Thanks.

Features
Extreme powerful (the output power of BANDIT V10 motor is 20% higher than the standard V10 motors), specially designed for out-law STOCK races.
Note: BANDIT motor isn't compliant with ROAR, IFMAR, BRCA and JMRCA rules.
Designed to withstand extreme levels of use at its highest peak performance.
Complete new CNC cut motor case with extra front spoke ventilation slots.
Works as a sensored unit and also sensorless without the sensor cable attached.
Multiple steps of mechanical timing adjustable from 20 degree to 50 degree.
Minimal maintenance is required with precise machining technology which ensures a minimum tolerance end play of the rotor shaft. Eliminating the copper shims used in most of today’s motors.
200°C high temperature tolerance and high purity copper windings maximize conductivity and reliability.
200°C high temperature tolerance sintered NdFeb magnets.
Extreme low resistance multi-layered outlet PCB and high RPM NSK bearings.

Advantages of XERUN-120A-V3.1 speedo

Aluminum bottom case improves the heat dissipation (The previous V3 speedo uses plastic bottom case);
Improved heat-sink with 1mm gap between the cooling fan allows more air flow to reduce the temperature of speedo;
Improved dust-proof design. Rubber rings are applied at the sensor port and the program port;
Aluminum screws of cooling fan look better and more professional;
Improved electronic switch has stronger current endurance to be more reliable;
New firmware allows driver to adjust the throttle neutral range, and solves the "turbo lost in high temperature" problem in the previous version firmware.
 
Features
All in One. Up to ten profiles can be stored in the memory and imported or exported easily. Factory pre-set profiles include:
Blinky mode, Modify Mode, Stock mode, Practice mode, Offroad mode, Drift mode, Crawler mode.
Built-in Electronic Switch, long life and high reliability, also saves space on the chassis.
Aluminum Upper and Bottom Cases with optional colors, giving better heat dissipation, and allowing higher current.
External Programming Port (EPP), easy to connect and also a power port for additional fan.
Advanced Dynamic Timing technology, providing more customization possibilities for highest level competitions.
Precise throttle and brake control, setting of drag brake and brake strength with more options, new punch and brake rate control functions, and throttle and brake curves through the PC client.
Integrated Data logger, recording the maximum temperature of ESC and motor as well as the maximum RPM, using LCD Programming box to check easily in the pits.
Multi Protection Functions, making your running safe with ESC and Motor overheat protection, low voltage cutoff and throttle signal loss protection.
Easily programmed with the Multifunction LCD Program Box and USB Link Software
New USB LINK Software graphic interface, providing extra parameters for advanced settings.
(Note: The V3.2_121204 or later version USB Link Softwarer is stongly recommended for XERUN V3.1 ESC)
ESC firmware can be updated through the USB adapter in the LCD Program Box.

(HW38020213)

SKU HW38020213
Brand HOBBYWING

Be The First To Review This Product!

Help other RC Hobbies Aust Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category


###FPV Power System M2405 2600kv prop

###FPV Power System M2405 2600kv prop

SKU: HW38040023

$198.18

10% OFF RRP $220.20
UBEC-3A (2-6S)

UBEC-3A (2-6S)

SKU: HW86010010

$19.62

10% OFF RRP $21.80
JUSTOCK-13.5T-BLACK-G2.1

JUSTOCK-13.5T-BLACK-G2.1

SKU: HW30408010

$114.61

10% OFF RRP $127.34
###XRotor micro video transmitter 25-200Mw

###XRotor micro video transmitter 25-200Mw

SKU: HW30505000

$72.36

10% OFF RRP $80.40
Fan-COMBO C1 (1/10th) 36mm dia x 65mm

Fan-COMBO C1 (1/10th) 36mm dia x 65mm

SKU: HW86080120

$12.96

10% OFF RRP $14.40
###X120A-V3.1 Aluminium Cases Set-RED

###X120A-V3.1 Aluminium Cases Set-RED

SKU: HW30800000012

$50.76

10% OFF RRP $56.40
1/8th ESC switch to suit XR8-SCT, Max10

1/8th ESC switch to suit XR8-SCT, Max10

SKU: HW30850008

$37.89

10% OFF RRP $42.10
COMBO-XERUN AXE540L R2-2800KV-FOC System

COMBO-XERUN AXE540L R2-2800KV-FOC System

SKU: HW38020313

$364.50

10% OFF RRP $405.00
####Sensor Harness for Xerun Series 400mm

####Sensor Harness for Xerun Series 400mm

SKU: HW30850104

$6.84

10% OFF RRP $7.60
###Xerun 3652SD sensored G2 motor 5100KV

###Xerun 3652SD sensored G2 motor 5100KV

SKU: HW30401054

$133.74

10% OFF RRP $148.60
####QUICRUN-WP-16BL30 Brushless ESC (use HW30110001)

####QUICRUN-WP-16BL30 Brushless ESC (use HW3011000

SKU: HW30110000

$53.46

10% OFF RRP $59.40
Seaking Pro 120A marine esc 2-6s

Seaking Pro 120A marine esc 2-6s

SKU: HW30302361

$171.09

10% OFF RRP $190.10
EZRUN Max5 combo with 56113 800KV motor

EZRUN Max5 combo with 56113 800KV motor

SKU: HW38010600

$573.93

10% OFF RRP $637.70
####QUICRUN-WP-8BL150 Brushless ESC (USE 30109003)

####QUICRUN-WP-8BL150 Brushless ESC (USE 30109003)

SKU: HW30109002

$194.94

10% OFF RRP $216.60
XERUN XR8 Plus G2S

XERUN XR8 Plus G2S

SKU: HW30113304

$352.63

10% OFF RRP $391.81
UBEC-5A-V2-Air  2-8S

UBEC-5A-V2-Air 2-8S

SKU: HW30607000

$22.86

10% OFF RRP $25.40