Axial SCX10 II 1969 Chevrolet Blazer RTR

Calculate Shipping

Fixed Rate By Invoice Total - $0.00
Excluding Dangerous Goods, Large Aircraft Kits/Parts, Large Car Kits/Bodies - Additional Charges May Apply (Once order is placed we will contact you if there are any additional charges)

Free pick-up from Liverpool store - $0.00
Pick up from: 339 Macquarie Street Liverpool NSW 2170 (02) 960 22 333. Confirmation from store required before picking up order. Goods CANNOT be picked up without store confirmation. Valid photo ID must be presented and verified, along with confirmation email, when picking up order. For all online order inquiries please call (02) 960 22 333. Thanks.

The Axial SCX10 II 1969 Chevrolet Blazer RTR 4WD Rock Crawler delivers classic looks with an open-air top and aggressive stance. But this Blazer sports more than just a macho look. Additional items like chrome-coated grille, mirrors and door handles are included. Officially licensed Chassis Unlimited front and rear tube bumpers are mounted tight to the body for maximum clearance and a set of offroad lights (with LEDs) shine some light when the sun goes down.

To keep the Blazer rolling along in even the toughest situations, Axial has mounted it on the proven SCX10 II chassis. High-clearance AR44 high-pinion axles, a chassis mounted servo (CMS), re-designed AX10 transmission case and tough steel suspension links are just a few of the parts that make the Blazer a beast on any terrain.

AR44 SINGLE PIECE AXLE
The pinion gear is 6mm above center, this allows for added ground clearance and better driveshaft angles. The high pinion design has an increased surface contact for increased durability. AR44 front and rear axles feature a single-piece design with molded truss for extreme durability. Integrated C-hubs and lockouts offer optimized performance as well as improved ground clearance. Helical, metal cut internal gears, and high-quality bearings are all standard equipment.

High pinion gears for added ground clearance & better driveshaft angles
The high pinion design allows increased gear surface contact for increased durability
Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain
AR44 front and rear axles feature a single-piece design with molded truss for extreme durability.
1-piece all-metal locker front and rear
Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.
Small pumpkin for increased clearance and a more realistic, scale look
Bolt on link mounts
Knuckle carriers and straight axle adapters have a better mounting system with 10-degree increment adjustments
Optimized gear ratio â€“ 3.75 compared to 2.92 previously. This reduces torque twist which is typically seen with other small pumpkin axle designs

1.9 METHOD HOLE WHEELS
The MR307 Hole is a fresh take on the classic hole-wheel design that dominated early off road racing. Just like the Double Standard and NV, the Hole features a simulated beadlock ring by way of a strategically placed under-cut on the outer lip of the wheel. Clean, simple and METHOD STRONG! These officially licensed METHOD Hole Wheels are replicated in true form for durability and a clean line look, molded in a magnesium grey color with a satin chrome beadlock rim.

1.9 FALKEN WILD PEAK M/T TIRE (S30)
The WildPeak All Terrain tire has amazing traction on many surfaces, even with its rather conservative pattern. This fact alone has had the entire industry on the edge of their seats waiting to see what the Falken rubber will be able to do with a more aggressive pattern.

Officially licensed by Falken Tire
119.0mm (4.7â€) Tall, 48mm (1.9â€) Wide
S30 compound

AR44â„¢ UNIVERSAL AXLE SET
Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.

Up to 45 degrees of steering
Smooth action for an efficient drivetrain
Compact yet durable design
Hardened steel construction

ALL STEEL SUSPENSION LINKS
Strong steel links for both suspension and steering. Large M4 rod ends for durability.

AE-5L ESC WITH DRAG BRAKE, WATERPROOF
The Axial AE-5L ESC is 3S LiPo capable yet easily switched â€œin the fieldâ€ between LiPo and NiMh battery types with a simple jumper â€“ no more complex procedures.

LED Light controller built-in with dual LED outputs for headlights/taillights.
Male Star Plug lead - compatible with the most common polarized plug.
Jumper 1 provides a simple plug and play choice between LiPo or NiMh.
Jumper 2 switches Drag Brake settings.
Waterproof design with Star Plug / laser etched heat sink.

NOTE: LED LEADS NOT COMPATIBLE WITH OLD AXIAL LED LIGHT STRINGS, or THIRD PARTY LED LIGHT STRINGS. Connecting your old LED light strings to these leads will cause damage to the AE-5L ESC and the light strings.

Specifications:
Length: 22" (559mm)
Width: 9.5" (241mm)
Height: 9.25" (235mm)
Wheelbase: 12.0" (304.8mm)
Ground Clearance: 3.0" (77mm)
Weight: 4.5lbs (2.04kg) estimated with electronics
Motor: 35T brushed motor
Radio: Tactic TTX300 3-CHANNEL SLT RADIO, 2.4gHz
Servos: Tactic TSX45 Servo. Torque: 6.0V 151 oz-in, 4.8V 143 oz-in
ESC: AE-5L, forward/reverse, drag brake, 3S LiPo compatible, waterproof

AR44 SINGLE PIECE AXLE The pinion gear is 6mm above center, this allows for added ground clearance and better driveshaft angles. The high pinion design has an increased surface contact for increased durability. AR44 front and rear axles feature a single-piece design with molded truss for extreme durability. Integrated C-hubs and lockouts offer optimized performance as well as improved ground clearance. Helical, metal cut internal gears, and high-quality bearings are all standard equipment. High pinion gears for added ground clearance & better driveshaft anglesThe high pinion design allows increased gear surface contact for increased durabilityLarger load bearings used around the gear set to reduce flex and create a stronger drivetrainAR44 front and rear axles feature a single-piece design with molded truss for extreme durability.1-piece all-metal locker front and rearUniversal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.Small pumpkin for increased clearance and a more realistic, scale lookBolt on link mountsKnuckle carriers and straight axle adapters have a better mounting system with 10-degree increment adjustmentsOptimized gear ratio â€“ 3.75 compared to 2.92 previously. This reduces torque twist which is typically seen with other small pumpkin axle designs1.9 METHOD HOLE WHEELS The MR307 Hole is a fresh take on the classic hole-wheel design that dominated early off road racing. Just like the Double Standard and NV, the Hole features a simulated beadlock ring by way of a strategically placed under-cut on the outer lip of the wheel. Clean, simple and METHOD STRONG! These officially licensed METHOD Hole Wheels are replicated in true form for durability and a clean line look, molded in a magnesium grey color with a satin chrome beadlock rim. 1.9 FALKEN WILD PEAK M/T TIRE (S30) The WildPeak All Terrain tire has amazing traction on many surfaces, even with its rather conservative pattern. This fact alone has had the entire industry on the edge of their seats waiting to see what the Falken rubber will be able to do with a more aggressive pattern. Officially licensed by Falken Tire119.0mm (4.7â€) Tall, 48mm (1.9â€) WideS30 compoundAR44â„¢ UNIVERSAL AXLE SET Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain. Up to 45 degrees of steeringSmooth action for an efficient drivetrainCompact yet durable designHardened steel constructionALL STEEL SUSPENSION LINKS Strong steel links for both suspension and steering. Large M4 rod ends for durability. AE-5L ESC WITH DRAG BRAKE, WATERPROOF The Axial AE-5L ESC is 3S LiPo capable yet easily switched â€œin the fieldâ€ between LiPo and NiMh battery types with a simple jumper â€“ no more complex procedures. LED Light controller built-in with dual LED outputs for headlights/taillights.Male Star Plug lead - compatible with the most common polarized plug.Jumper 1 provides a simple plug and play choice between LiPo or NiMh.Jumper 2 switches Drag Brake settings.Waterproof design with Star Plug / laser etched heat sink.NOTE: LED LEADS NOT COMPATIBLE WITH OLD AXIAL LED LIGHT STRINGS, or THIRD PARTY LED LIGHT STRINGS. Connecting your old LED light strings to these leads will cause damage to the AE-5L ESC and the light strings. Specifications: Length: 22" (559mm) Width: 9.5" (241mm) Height: 9.25" (235mm) Wheelbase: 12.0" (304.8mm) Ground Clearance: 3.0" (77mm) Weight: 4.5lbs (2.04kg) estimated with electronics Motor: 35T brushed motor Radio: Tactic TTX300 3-CHANNEL SLT RADIO, 2.4gHz Servos: Tactic TSX45 Servo. Torque: 6.0V 151 oz-in, 4.8V 143 oz-in ESC: AE-5L, forward/reverse, drag brake, 3S LiPo compatible, waterproof