HPI Nitro Star T3.0 Engine with Pullstart

HPI-15107

SKU: HPI-15107

$175.00
Out of Stock: Available to Order



Fixed Rate By Invoice Total - $18.99
Excluding Dangerous Goods, Large Aircraft Kits/Parts, Large Car Kits/Bodies - Additional Charges May Apply (Once order is placed we will contact you if there are any additional charges)

Free pick-up from Liverpool store - $0.00
Pick up from: 339 Macquarie Street Liverpool NSW 2170 (02) 960 22 333. Confirmation from store required before picking up order. Goods CANNOT be picked up without store confirmation. Valid photo ID must be presented and verified, along with confirmation email, when picking up order. For all online order inquiries please call (02) 960 22 333. Thanks.

6.5mm Rotary Carb./ABC/Standard Shaft/Side Exhaust/Heatsink Head/Black Crank Case

Powering the RTR NITRO RS4 3 EVO+, the T3.0 is HPI's a fantastic engine for speed fanatics! With 3cc of displacement for an impressive 0.18 cubic inches, this is an easy upgrade for just about every on-road racer!

Glow Plug: Cold R5 (HPI #1504) Displacement: 3.01cc Boar: 16.8mm Stroke: 13.6mm Power: 2.2hp @ 31,000 RPM Maximum RPM: 32,000 RPM Carburettor: F2-6.5 (Composite 6.5mm) This engine is supplied with a pullstarter. If you prefer to use a Roto Start with this engine, you will need #87132 Roto Start 2 Set and a standard 7.2 volt stick pack battery . A variety of race-tuned standard features will make the T3.0 your engine of choice. The finned crank case helps keep everything running at the right temperature, and the tall finned aluminium cooling head further reduces operating temp for optimum efficiency. With ABC construction (Aluminium piston, Brass cylinder liner sleeve, Chrome-plated liner) you get the benefit of decades of 2-stroke racing technology. The composite carb keeps needle tuning consistent as the engine heats up, and the wide 6.5mm opening ensures a good supply of fuel to the combustion chamber. All of this adds up to a fantastic engine that is solid, fast and easy to use! When you need to go all out to get maximum speed, you can depend on the HPI Nitro Star T3.0!

(HPI-15107)

SKU HPI-15107
Brand HPI
Shipping Weight 8.0000kg

Be The First To Review This Product!

Help other RC Hobbies Aust Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


HPI Shim Set 3x5mm (M3x5x0.1,0.2,0.3mm/10pcs each)

HPI Shim Set 3x5mm (M3x5x0.1,0.2,0.3mm/10pcs each)

SKU: HPI-72111

$12.00

HPI Heavy Duty 1st Gear Adapter

HPI Heavy Duty 1st Gear Adapter

SKU: HPI-A882

$19.00

42% OFF RRP $33.00

More From This Category


HPI Rear Suspension Arm Set

HPI Rear Suspension Arm Set

SKU: HPI-100315

$16.00

HPI C-Clip 20mm (4pcs)

HPI C-Clip 20mm (4pcs)

SKU: HPI-Z235

$4.00

HPI Bumper Set

HPI Bumper Set

SKU: HPI-85420

$28.00

RPM Light Pod Mounts - Black - Baja 5B

RPM Light Pod Mounts - Black - Baja 5B

SKU: RPM81022

$22.00

HPI Pinion Gear Heat Sink

HPI Pinion Gear Heat Sink

SKU: HPI-86712

$7.00

HPI Exhaust Gasket (2pcs)

HPI Exhaust Gasket (2pcs)

SKU: HPI-15481

$15.00

Yeah Racing Aluminium Spur Gear Support Plate - Red

Yeah Racing Aluminium Spur Gear Support Plate - Re

SKU: YA-0304RD

$10.00

HPI 8T Bullet Flux Pinion

HPI 8T Bullet Flux Pinion

SKU: HPI-101283

$15.00

HPI Shaft 6x108mm (2pcs)

HPI Shaft 6x108mm (2pcs)

SKU: HPI-86635

$30.00

HPI Rubber Cap 6x5mm (8pcs)

HPI Rubber Cap 6x5mm (8pcs)

SKU: HPI-86664

$7.00

22% OFF RRP $9.00
HPI Diff Bevel Gear Set (13T/10T)

HPI Diff Bevel Gear Set (13T/10T)

SKU: HPI-A850

$16.00

HPI Metal Spacer Set 5x7.5x3mm

HPI Metal Spacer Set 5x7.5x3mm

SKU: HPI-86171

$5.00

HPI 10T Spiral Input Gear

HPI 10T Spiral Input Gear

SKU: HPI-101191

$37.00

5% OFF RRP $39.00
HPI Rear Hub Set (2 and 3 Degrees)

HPI Rear Hub Set (2 and 3 Degrees)

SKU: HPI-85095

$11.00

8% OFF RRP $12.00
HPI Rear Bumper Set

HPI Rear Bumper Set

SKU: HPI-101296

$16.00

HPI UNIBALL

HPI UNIBALL

SKU: HPI-15266

$12.00